Filter
Top Products
56
[Q Value]:
Set the sensitivity for detecting RFID tags.
Default 0
Range 0 to 15
[AGC Threshold]:
Set the threshold value used to determine an RFID tag is defective or not.
Default 0
Range 0 to 15
[Write AGC Threshold]:
Set the threshold value used to determine whether or not to write data to RFID tags.
Default 0
Range 0 to 15
[Write Retry Min. AGC]:
Set the lower limit value used to determine whether or not to retry a data write.
Default 0
Range 0 to 15
[RF Channel]:
Set a channel used for data write.
Default AUTO
Options AUTO, 2 CH, 3 CH, 4 CH, 5 CH, 6 CH, 7 CH, 8 CH
[Multi-word Write]:
Select whether or not to enable the multi-word write function for Gen2-compatible Hibiki tag.
When this function is used, the data write efficiency is increased.
Default Disable
Options Disable, Enable
[Retry] Group
[Retry Position Adjustment]:
Set the amount the printer feeds the RFID label forward or backward to retry a data write.
Default 0 mm
Range -99 to 99 mm
[Issue Retry Labels]:
Set the number of RFID labels to be issued for retry.
Default 3 labels
Range 0 to 255 labels
[Read Retry Count]:
Set the max. number of times reading one RFID tag is retried.
Default 5 times
Range 0 to 255 times
[Read Retry Timeout]:
Set the timeout value for retry to read one RFID tag.
Default 4.0 sec
Range 0.0 to 9.9 sec
[Write Retry Count]:
Set the number of times writing data to one RFID tag is retried.
Default 5 times
Range 0 to 255 times
[Write Retry Timeout]:
Set the timeout value for retry to write data to one RFID tag.
Default 2.0 sec
Range 0.0 to 9.9 sec