Filter
Top Products
Chapter 12: Additional Information
223
F5: How do I make sure that the Wireless LAN SW has been
installed successfully and that Wireless LAN already work prop-
erly?
(1) Please check if the “IEEE 802.11b WLAN Adapter” already exist
in Start, Settings, Connections, Network Adapters; if not, the
Wireless LAN Driver is not Installed successfully.
(2) Please check if the Wireless LAN Utility already exist and could
be opened successfully by simply click Start, Settings, System,
then Wireless LAN Utility.
(3) Click Start, Settings, System, Wireless LAN Utility, Link to check
the current Link information in the Link Page.
Error Messages for Bluetooth
This section explains the causes of and solutions for the various dis-
played error messages.
Error messages during COM/DUN service
An error has occurred with the Bluetooth SD Card. Confirm that the
card is working properly.
Cause There was an error when loading the driver.
Solution Try reinserting the Card.
Unable to retrieve Local Device information.
Solution Reset the Toshiba Pocket PC.
Unable to retrieve Local Device information due to insufficient mem-
ory. Check the amount of available memory.
(1) Turn off the Wireless LAN Switch will cause the dis-
connection of the Wireless Network, please make sure
to close all the Wireless Connection before you exe-
cute this function.
(2) The Turn Off function on the TMU icon will cause the
disconnection of the Wireless Network, please make
sure to close all the Wireless Connection before you
execute this function.
(3) Enable “Power Saving Mode” will keep the connectiv-
ity but will lower down the average throughput due to
longer connection period for the Wireless Network.
(4) If you are in 802.11 Ad Hoc Mode, you are not allowed
to enable “Power Saving Mode”, because Ad Hoc
Mode doesn’t support this function.
NOTE