Filter
Top Products
8
your Pocket PC to a computer via the docking cradle for data transfer or
data restoration purposes, Toshiba will not be responsible for any Pocket
PC or computer malfunction, problems with data transfer or data modifica-
tions/loss that may occur in these environments.
Use your Pocket PC only in locations with the following ambient environ-
mental conditions:
Under normal operational use with temperatures between 0°C and 40°C
(32°F and 104°F); With humidity of 30% to 80%; and When charging the
battery with temperatures between 5°C and 40°C (41°F and 104°F).
Do not store or use your Pocket PC in the following locations:
Those subject to extremely high or low temperatures; Dusty locations;
and Locations or sites subject to strong vibration.
Use or storage in these location, sites or areas can result in product fail-
ure, malfunction or loss of data.
Do not subject your Pocket PC to sudden and severe temperature
changes. This could result in moisture condensation in the Pocket PC that
could cause damage to your Pocket PC, computer function loss, and/or
the loss of data. In the event of moisture condensation, allow your Pocket
PC to dry out completely.
It is normal for the AC Adaptor to become warm when charging.
Disconnect the power plug from the outlet when not in use.
Take care not to sit on your Pocket PC when it is located in the back
pocket of trousers, etc. This could cause damage to your Pocket PC or
malfunction of the Pocket PC functions.
Do not place objects on top of your Pocket PC or drop them on top of your
Pocket PC. This could cause damage to your Pocket PC and/or malfunc-
tion.
Clean terminals (metallic parts) on a regular basis with a cotton swab.
Dirty terminals could affect battery charging.
Never use organic solvents such as benzene or paint thinner to clean
your Pocket PC. Use of these solvents can cause deformation or discolor-
ation.
Do not wipe the display with a damp or wet cloth or touch the display with
damp or wet hands. Wiping or touching the display under this condition
can cause product failure or malfunction. Always use a soft dry cloth to
wipe the display.
When using the “SD memory card” and/or “(CF) compact flash
card,” be sure to read the relevant instruction manual and ensure
that you know the proper procedures for their use.