Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
6-2
SELECTING FINISHING MODES
1. FINISHING MODES AND FINISHERS (OPTIONAL)
There are 2 types of optional finishers (MJ-1017 and MJ-1018).
Functions available differ depending on whether a finisher is installed
and which type of finisher it is.
- Press the key on the basic screen on the right (shaded), and confirm
the finishing modes on the panel.
* The touch panel used in this chapter appears when the optional
saddle stitch finisher (MJ-1018, with hole punch unit) and inserter
are installed with your copier.
Names of the Main Components
When the finisher trays reach their maximum loading capacity
( Page 9-4), the following message appears:
Remove paper from the finisher
Remove the copies from the trays and the copier automatically
resumes making copies.
Hole punch unit
(sold separately)
Upper cover
Tray s
Front cover
Saddle stitch tray (MJ-1018 only)
Lower cover
Inserter
(sold separately)