Filter
Top Products
2
EPA ENERGY STAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the ENERGY
STAR Program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an
ENERGY STAR Partner, the
TOSHIBA TEC CORPORATION has determined that this copier model meets the
ENERGY STAR guidelines
for energy efficiency.
ENERGY STAR guidelines for this class of copier require ENERGY STAR copiers to have an 'Off Mode' feature
that automatically turns the copier off after a period of inactivity, ensuring night and weekend shut-off. The copier
must also automatically change to a 'Low Power Mode' (Automatic Energy Save) after a period of time since the
last usage.
For Copier+Printer models,
ENERGY STAR guidelines require ENERGY STAR Multifunction copiers to have
a 'Sleep Mode' feature that automatically makes the copier enter the sleep mode after a period of inactivity. The
copier must also automatically change to a 'Low Power Mode' (Automatic Energy Save) after a period of time since
the last usage.
Specifically, this copier complies with the following requirements ––––
e-STUDIO550/650/810 Copier model (Base model)
'Off Mode'-
The copier consumes less than 20 watts in the 'Off Mode'.
'Off Mode' Default Time-
The default time for the 'Off Mode' is 90 minutes.
'Automatic Energy Save'-
The copier consumes less than 216 watts (e-STUDIO550)/ 255 watts (e-STUDIO650)/ 316 watts (e-
STUDIO810) while in Energy Save Mode.
'Automatic Energy Save' Default Time-
The default time before switching to 'Automatic Energy Save Mode' is 15 minutes.
e-STUDIO550/650/810 Copier + Printer model (Multifunction model)
'Sleep Mode'-
The copier consumes less than 95 watts in the 'Sleep Mode'.
'Sleep Mode' Default Time-
The default time before sitching to 'Sleep Mode' is 90 minutes.
'Automatic Energy Save'-
The copier consumes less than 261 watts (e-STUDIO550)/ 300 watts (e-STUDIO650)/ 361 watts (e-
STUDIO810) while in Energy Save Mode.
'Automatic Energy Save' Default Time-
The default time before swtching to 'Automatic Energy Save Mode' is 15 minutes.
Note1- The default setting for the 'Off Mode' or 'Sleep Mode' and 'Automatic Energy save' can be changed.
Note2- To restart the copier after an automatic shutoff or in the sleep mode, press the power key on the control
panel.
Note3- In the sleep mode, if printer data is received, or the start key on the control panel is pressed, the copier
starts warming itself up and prints out the data when it becomes ready.
Note4- For Copier models (Base models), after an automatic shutoff, the weekly timer feature cannot be
activated. If you prefer to activate this feature, contact your authorized Toshiba dealer.
* Note 4 is applied to the regions with power requirements other than 100V.
In accordance with the EPA
ENERGY STAR Program guidelines, this copier is suitable for the use of recycled
copier paper (with up to 100% post-consumer content) meeting the requirements as specified in ENV 12281
(paper-printing and business paper-Requirements for copy paper for dry toner imaging processes).
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Toshiba dealer.
ENERGY STAR is a U. S. registered mark.