Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
6-8
SELECTING FINISHING MODES
2
Place the original(s). Page 2-9
3
Press the key on the basic screen as shown on the
right (shaded).
Number of punch holes and available paper sizes:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch
unit that meets your requirements. (For details, consult your
service technician.)
4
Press the HOLE PUNCH key.
- If the desired function keys are not displayed, press the Next
key to change the menu screen.
Select other copy modes as required.
5
Press the START key.
5. HOLE PUNCH MODE (OPTIONAL)
1
Place paper in the drawer(s). Page 2-4
- When using this mode in bypass copying (
Page 5-8), be
sure to specify the paper size.
With the optional hole punch unit attached to the optional finisher (MJ-1017, MJ-1018), you can have your
copies punched with holes.
* The paper weight should be in the range of 64 - 256 g/m
2
. Special paper such as OHP films or labels is
excluded.
Japan and most of
Europe (MJ-6003E)
North America
(MJ-6003N)
France
(MJ-6003F)
Sweden
(MJ-6003S)
Number of punch holes and hole diameter
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm pitch)
4 holes
(6.5 mm dia.; 70, 21 mm pitch)
Available paper sizes
A3, A4, A4-R, B4, B5, B5-R,
FOLIO, LD, LG, LT, LT-R, COMP
2 holes: LG, LT-R
3 holes: A3, A4, LD, LT
A3, A4, LD, LT
A3, A4, A4-R, B4, B5, B5-R, FOLIO
LD, LG, LT-R, COMP