Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
2-6
HOW TO MAKE COPIES
2. SETTING COPY PAPER (Cont.)
The paper size of the drawers of the copier can be changed to desired size. The drawers can also be set for
cover sheet, insertion, tab paper, thick paper and special sheets.
1
Pull out the drawer toward you.
-Do not touch the slide rail of the drawer.
4
While pushing the size selection lever in the direction
of the arrow, set the side guide to the desired paper
width (indicated on the bottom surface of the drawer).
- Adjust the side guides with both hands.
3
Push the arrow part (right side) of the size selection
lever to unlock it.
5
Push the arrow part (left side) to lock the size selection
lever.
6
Place paper in the drawer(s).
- Place the paper in face down.
- Notes for placing paper in the drawer. Page 7-3, step 2
7
Push the drawer straight into the copier until it
comes to a stop.
- Be sure to push the drawer carefully and fully in.
Be carefull not to let your fingers be caught when closing the drawer.
Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses
Changing the Paper Size of the Drawer
2
Push the lower part of the width guide in the direction
of the arrow to remove it, and reinstall the width
guide at the desired paper size (indicated on the
bottom surface of the drawer).
Slide rail