Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
8-4
MAINTENANCE
Is the reversing automatic
document feeder firmly closed?
Is the original cover or the transport
belt of the reversing automatic
document feeder dirty?
Is the scanning area dirty?
Is the copy density set properly?
Reference page
Select the same size of copy paper as the
original, or set the reproduction ratio suitable
for the paper size.
Set a smaller image shift value.
Are the original size and direction,
as well as the reproduction ratio,
suitable for the paper size?
Is the margin on the copy set
properly?
Countermeasure
Place the original firmly on the glass and close
the reversing automatic document feeder.
Replace with new paper.
Items to be checked
Does the entire original lie properly
on the surface of the glass?
Is the copy paper moist?
Copy images are blurred
Images are partially missing
Page 3-2, 3-4
Page 4-2
2. SIMPLE TROUBLESHOOTING (Cont.)
Page 7-3
Copies are stained
Close the reversing automatic document feeder
firmly to shut out any outer light.
Clean the original cover or the transport belt.
Set the copy density properly with the AUTO key
or manual density keys.
Page 2-10
Page 8-2
Page 3-11
Is the copy density adjustment
set darker than is standard?
Copy density is too high
Use the manual density keys to set the copy
density properly.
Page 3-11