Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
3-11
4
Press the START key.
- If the automatic density mode is not selected, press the
MANUAL key, then press the AUTO key on the next screen.
4. COPY DENSITY ADJUSTMENT
There are two types of image density adjustments: automatic mode (default setting) and manual mode. In
the automatic mode, the sensors automatically detect the density of each original and select the optimum
image density. In the manual mode, you can select the desired level of image density. It is recommended
that lighter-density original be coped in the manual copy density mode.
3
Confirm that “AUTO” is displayed on the basic
screen.
1
Place paper in the drawer(s). Page 2-4
Automatic Copy Density Mode
2
Place the original(s). Page 2-9
Select other copy modes as required.