Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
4-24
USING THE EDITING FUNCTIONS
Tab width
Align the tab paper with
the original scale
Original scale
Shift width
Align the original with
the original scale
Original scale
12. TAB PAPER MODE(Cont.)
2
Press the TAB EXTENSION key.
3
Press the CASSETTE key (or the BYPASS FEED
key), then adjust the tab extension (tab width) and
the shift width then press the SET key.
- Adjust the tab width and the shift width by means of the
0mm key and the
30mm key.
Unless the tab width has refreshed, the previous value is valid.
The initial settings are set to 13mm for the tab width and the
shift width.
The range of the tabwidth/the shiftwidth
Tab width
Shift width
Drawer
Bypass
12 to 17mm
10 to 20mm
0 to 30mm
0 to 30mm
Measuring the tab width/the shift width
The tab width and the shift width can be measured on the original
glass. Place tab paper for measuring the tab width and place original
for measuring the shift width on the original glass as indicated on the
right. The marks of the original scale have a 2mm pitch.
- Measuring the tab width (Place tab paper)
- Measuring the shift width (Place original)