Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
2-10
HOW TO MAKE COPIES
3. SETTING ORIGINALS (Cont.)
1
Raising the reversing automatic document feeder,
place the original in the direction as shown in the
illustration.
- When using the Book-Type Originals 2-sided Copies (
Page 3-8) or the Dual-Page ( Page 4-5) function, centre
the book original on the yellow indicator line.
Sheet Originals
When Placing an Original on the Glass
Blank sheet
1
Raising the reversing automatic document feeder,
place the original face down on the glass.
2
Align the original against the left inner corner of
the glass.
3
Lower the reversing automatic document feeder
slowly.
When using the non sorting and non staple mode, the paper exits face up.
Original
Original
- When copying originals with high transparency, such as OHP
films and tracing paper, place a blank sheet of paper the size
of the original or larger over the original.
Book-type Originals
2
Lower the reversing automatic document feeder
slowly.
- Do not try to force the reversing automatic document feeder
to fully close over a very thick original, such as a big book.
Copies can be made even if the cover or feeder does not
close fully.
- During copying, an intense light may leak out. Do not look at
the original glass surface.