Filter
Top Products
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved MR-2017/2020
DISASSEMBLY AND ASSEMBLY
4 - 19
4
[D] Read motor drive section
(1) Take off the rear motor.
( P. 4-18 "[C] Read motor (M2)")
(2) Remove 1 spring. (Spring: Outside diameter
of coil –ø8.8 mm, active coils – 12.5)
(3) Release the harness from 2 harness clamps.
Fig. 4-54
(4) Remove 3 screws and then take off the
bracket.
Fig. 4-55
(5) Take off 1 timing belt and 4 bushings.
Fig. 4-56
Spring
Harness clamp
Harness clamp
Bracket
Timing belt
Bushing Bushing
07/06