Filter
Top Products
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved MR-2017/2020
DISASSEMBLY AND ASSEMBLY
4 - 21
4
4.4 Solenoid
[A] Original pickup solenoid (SOL)
(1) Take off the original feed motor drive section.
( P. 4-17 "[B] Original feed motor drive
section")
(2) Disconnect 1 connector. Remove 2 screws
and take off the original pickup solenoid with
the bracket.
Fig. 4-58
(3) Remove 2 screws and take off the original
pickup solenoid from the bracket.
Fig. 4-59
Note: Note:
When installing the original pickup solenoid,
be sure to align the edge of the original
pickup solenoid with the mark-off line on the
frame.
Fig. 4-60
Original pickup solenoid
Connector
Original pickup solenoid
Bracket
Mark-off line