Filter
Top Products
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved MR-2017/2020
DISASSEMBLY AND ASSEMBLY
4 - 25
4
[E] Original registration sensor (S4)
(3) Remove 2 screws and take off the bracket.
Fig. 4-70
(4) Disconnect 1 connector. Release 2 latches
and take off the original empty sensor.
Fig. 4-71
(1) Take off the feeder lower guide.
( P. 4-9 "[E] Feeder lower guide")
(2) Disconnect 1 connector. Release 2 latches
and take off the original registration sensor.
Fig. 4-72
Bracket
Original empty sensor
Original registration sensor