Filter
Top Products
MR-2017/2020 © 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 22
4.5 Sensor/switch
[A] Original tray width sensor (S2)
(1) Take off the original tray.
( P. 4-4 "[E] Original tray")
(2) Remove 3 screws. Release 8 latches and
separate the original tray into 2 parts.
Fig. 4-61
(3) Remove 1 screw and take off the cover.
(4) Disconnect 1 connector and take off the orig-
inal tray width sensor.
Fig. 4-62
Note: Note:
If washers (3 pcs) and a pinion come off,
assemble them in the order as shown in the
illustration.
Fig. 4-63
Original tray
width sensor
Connector
Cover
Washer
(
Black: t= 0.25
)
Washer
(
Gold
)
Washer
(
Black: t= 0.13
)
Pinion
06/09