Filter
Top Products
MR-2017/2020 © 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 26
[F] Read sensor (S5)
[G] Original exit/reverse sensor (S6)
(1) Take off the pre-reading guide.
( P. 4-12 "[H] Pre-reading guide")
(2) Release 2 latches and take off the read sen-
sor from the pre-reading upper guide.
Fig. 4-73
(1) Take off the pre-reading guide.
( P. 4-12 "[H] Pre-reading guide")
(2) Disconnect 1 connector.
Fig. 4-74
(3) Open the ADF. Remove 4 screws, and then
take off 2 holders and platen guide.
Fig. 4-75
Read sensor
Connector
Holder
Platen guide
Holder