Filter
Top Products
MR-2017/2020 © 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 24
[C] Jam access cover sensor (S7)
[D] Original empty sensor (S3)
(1) Open the jam access cover.
(2) Remove 1 screw and take off the metal plate
cover.
Fig. 4-67
(3) Disconnect 1 connector. Release 2 latches
and take off the jam access cover sensor.
Fig. 4-68
(1) Open the jam access cover.
(2) Remove 1 screw and take off the metal plate
cover.
Fig. 4-69
Metal plate cover
Jam access cover sensor
Metal plate cover