Filter
Top Products
MR-2017/2020 © 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 20
(6) Loosen 1 screw of the belt tensioner.
(7) Remove the 4 E-rings, and then take off the
4 pulleys and timing belt.
Note: Note:
When the unit is being assembled, first install
the parts removed at steps (3), (4), (5) and
(7), and attach the spring removed at step (2)
next. Then tighten the screw loosened at
step (6).
Fig. 4-57
Timing belt
Tensioner
Screw
E-ring
07/06