Filter
Top Products
MR-2017/2020 © 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 30
4.7 Others
[A] Hinge stopper
(1) Remove 1 screw and then take off the hinge
stopper.
Fig. 4-82
Note: Note:
When the hinge stopper is taken off, the
opening angle for the RADF becomes
approx. 90 degrees. Take off the hinge stop-
per only when it is needed for installation,
maintenance service, etc.
Fig. 4-83
Hinge stopper