Filter
Top Products
User’s Manual 8-7
Optional Devices
SD card care
■ Do not write to an SD card if the battery power is low. Low power could
affect writing accuracy.
■ Do not remove an SD card while read/write is in progress.
■ The SD card is designed so that it can be inserted only one way. Do not
try to force the SD card into the SD card slot.
■ Do not leave an SD card partially inserted in the slot. Press the SD card
until you hear it click into place.
■ Do not twist or bend SD cards.
■ Do not expose SD cards to liquids or store in humid areas or lay media
close to containers of liquid.
■ After using an SD card, return it to its case.
■ Do not touch the metal part or expose it to liquids or let it get dirty.
Creation of a boot disk
Within the TOSHIBA SD Memory Boot Utility, a bootable SD memory card
can be created if required. Refer to the Utilities of Chapter 1, Introduction
for details.
Memory expansion
You can install additional memory in the computer’s memory module slot to
increase the amount of RAM. This section describes how to install and
remove a memory module.
Set the write-protect switch to the lock position, if you do not want to record
data.
■ Place a mat beneath the computer to prevent scratching or damaging
the computer's lid when installing/replacing the memory module. Avoid
mats made of materials that generate static electricity.
■ When you install or remove a memory module, ensure that you do not
touch any other internal areas of the computer.