Filter
Top Products
4-12 User’s Manual
Operating Basics
Inserting a module
Insert the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown
below and press until the ejector clicks.
2. If you want to lock the Slim Select Bay HDD adaptor, set the Slim Select
Bay lock screw in the hole for the lock position (➁). The lock screw is
inserted in the unlock position (➀) at the time of purchasing.
Figure 4-5 Inserting the Slim Select Bay HDD adaptor
Using optical disk drives
The text and illustrations in this section refer primarily to the optical disk
drive. However, operation is the same for other optical drive in the Slim
Select Bay. The full-size drive provides high-performance execution of CD/
DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows and the Slim Select Bay indicator
glows.
If you have a DVD-ROM&CD-R/RW drive, refer also to the Writing CDs on
DVD-ROM&CD-R/RW drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs/DVDs.
The optical disk drive and other Slim Select Bay modules can become hot
with use. Be careful when removing the module.
Slim Select Bay HDD
adaptor
Lock screw
Use the WinDVD application to view DVD-Video discs.