Filter
Top Products
User’s Manual 4-13
Operating Basics
Loading discs
To load CD/DVDs, follow the steps below and refer to figures 4-6 to 4-9.
1. When the computer’s power is on, press the eject button to open
the disc tray slightly.
Figure 4-6 Pressing the eject button
2. Grasp the disc tray gently and pull until it is fully opened.
Figure 4-7 Pulling the disc tray open
When the power of the optical disk drive is off, pressing the Fn + Tab keys
will turn the power of the optical disk drive on. Furthermore, it is possible to
set it to turn the power of the optical disk drive on and eject the tray at the
same time.
Eject button
Disc tray