Filter
Top Products
E6581222
62
■ Monitor parameters * These parameters are read-only (monitor-only) parameters.
Communi-
cation No.
Title Function Unit Remarks
FC00 - Monitor of key data (Effective data) - See 8.4.
FC01 - Monitor of inverter keypad data - See 8.4.
FC90 - Trip code - See 8.2.
FC91 - Alarm code - See 8.2.
FD00 - Operation frequency (current frequency) 0.01Hz
FD01 - Inverter status (current status) - See 8.2.
FD06 - Input terminal information (current information) - See 8.3.
FD07 - Output terminal information (current information) - See 8.3.
FD42 - Inverter status2 (current status) - See 8.2.
FD49 - Inverter status3 (current status) - See 8.2.
FE00 - Operation frequency
*5
0.01Hz
FE01 - Inverter status
*5
- See 8.2.
FE02 - Operation frequency command (actual instruction)
*5
0.01Hz
FE03 - Load current 0.01%
FE04 - Input Voltage 0.01%
FE05 - Output voltage
*5
0.01%
FE06 - Input terminal information
*5
- See 8.3.
FE07 - Output terminal information
*5
- See 8.3.
FE08 - CPU1 version -
FE09 - EEPROM version -
FE10 - Past trip 1 - See 8.2.
FE11 - Past trip 2 - See 8.2.
FE12 - Past trip 3 - See 8.2.
FE13 - Past trip 4 - See 8.2.
FE14 - Cumulative operation time 1H
FE15 - Primary frequency (compensated frequency)
*5
0.01Hz
FE16 - Estimated motor operation frequency
*5
0.01Hz
FE18 - Torque 0.01%
FE20 - Torque current
*5
0.01%
FE21 - Excitation current
*5
0.01%
FE22 - Analog (VIA) input frequency
*5
0.01Hz
FE26 - Motor (Electronic-thermal) load factor
*5
1%
FE27 - Inverter load factor
*5
1%
FE29 Input power 0.01KW
FE30 - Output power
*5
0.01KW
FE35 - Analog input value VIA
10-bit resolution (data range: 0 to 1023)
- See 8.3.
FE36 - Analog input value VIB
10-bit resolution (data range: 0 to 1023)
- See 8.3.
FE42 - Inverter status2 - See 8.2.
FE45 - Command mode(CMOD) status - See 8.2.
FE46 - Frequency mode(FMOD) status - See 8.2.
FE49 - Inverter status3 - See 8.2.
FE70 - Rated current 0.1A
FE71 - Rated voltage 0.1V
FE73 - CPU2 version -
FE75 - monitor of inverter number Hard SW -
FE76 - Integral Input power 0.01kWh
FE77 - Integral Output power 0.01kWh
FE79 - Life alarm information - See 8.2.
FE80 - Cumulative power-on time 1H
*5: If a trip occurs, data immediately before its occurrence is displayed.