Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 6 -
The following parts are located on the router’s front panel.
Part Description
Wireless
antennas
Use these antennas to receive and transmit wireless data.
ON/OFF switch Use this switch to power on/off the router.
Power socket
Use this socket to connect the power adapter that is provided with
the router.
WIFI ON/OFF
switch
Use this switch to enable or disable the wireless function.
WAN port
(Internet port)
Use this port to connect the DSL/cable modem or Ethernet.
LAN ports
(Ethernet ports)
Use these ports to connect local PC(s) to the router.
USB port Use this port to connect a USB storage device or USB printer.
Table 1-2 Part description
¾ Side panel
Figure 1-3 Side panel
Two buttons are located on the router’s side panel.
Button Description
AP CLONE
/PAIR
Use this button to perform AP clone. For details, please refer to
3.2.2 Unify and Extend the Network via AP Clone
.
RESET/WPS
Press this button for less than 5 seconds to enable the WPS
function. If your client device such as wireless adapter supports
WPS (Wi-Fi Protected Setup), use this button to automatically
establish a WPA secure connection between the client device and
the router.
Press this button for more than 10 seconds to restore the router to
factory defaults.
Table 1-3 Button description