Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 40 -
Step 3: “Connecting succeeded!” will appear on the screen of Figure 4-18, which means the
client device has succe
ssfully connected to the router.
III. Enter the router’s PIN on your client device
Use this method if your client device asks for the router’s PIN number.
Step 1: On the client device, enter the PIN number listed on the router’s Wi-Fi Protected Setup
screen, shown in Figure 4-15 (It is also labeled on the bottom of the router).
Step 2: The WPS LED blinks for
two minutes during the Wi-Fi Protected Setup process.
Step 3: When the WPS LED is on, the client device has successfully connected to the router.
Step 4: Refer back to your client device or its documentation for further instructions.
)
Note:
1) The WPS LED on the router will light on for five minutes if the device has been successfully
added to the network.
2) The WPS function cannot be configured if the Wireless Function of the router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
4.6.3 Wireless Security
Choose menu “Wireless 2.4GHz → Wireless Security”, and then you can configure the security
settings of your wireless network.
There are five wireless security modes supported by the router: WPA-Personal, WPA2-Personal,
WPA-Enterprise, WPA2-Enterprise, and WEP.