Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 76 -
services on your LAN. A virtual server is defined as a service port, and all requests from Internet
to this service port will be redirected to the computer specified by the server IP. Any PC that was
used for a virtual server must have a static or reserved IP address because its IP address may
change when using the DHCP function.
Figure 4-67 Virtual Servers
To add a new virtual server, please follow the steps below:
1. Click the Add New... button. (pop-up
Figure 4-68)
Figure 4-68 Add or Modify a Virtual Server Entry
¾ Service Port - The numbers of External Service Ports. You can enter a service port (the
format is XX) or a range of service ports (the format is XX – XX; the first XX is the Start port
and the second XX is the End port).
¾ Internal Port - The Internal Service Port number of the PC running the service application.
You can leave it blank if the Internal Port is the same as the Service Port, or enter a
specific port number when Service Port is a single one.
¾ IP Address - The IP address of the PC running the service application.
¾ Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols
supported by the router).
¾ Status - The status of this entry. Select “Enabled" to enable the virtual service.