Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 49 -
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog
)
Note:
Limited by local law regulations, version for North America does not have region selection
option.
¾ Mode
z 11a only/11n only - Select the corresponding mode if you are using 802.11a or
802.11n wireless clients only.
z 11an mixed - Select this mode if you are using both 802.11a and 802.11n wireless
clients. It is strongly recommended that you set the Mode 11an mixed, so that all of
802.11a and 802.11n wireless stations can connect to the router.
¾ Channel Width - Select the channel width from the drop-down list. The default setting is
automatic, which can adjust the channel width for your clients automatically.
¾ Channel - This field determines which operating frequency will be used. The default channel
is set to Auto, so the router will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
¾ Enable SSID Broadcast - When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the router. If you select the Enable
SSID Broadcast checkbox, the Wireless router will broadcast its name (SSID) on the air.
4.7.2 WPS
Choose menu “Wireless 5GHz → WPS”, and then you can the screen as shown in Figure 4-29.
This section will guide you to add a new wireless device to an existing network quickly by WPS
(Wi-Fi Protected Setup) function.