Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 34 -
Figure 4-10 LAN
¾ MAC Address - The physical address of the router. The value can't be changed.
¾ IP Address - Enter the IP address of your router or reset it in dotted-decimal notation
(factory default: 192.168.1.1).
¾ Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
)
Note:
1) If you change the IP Address of LAN, you must use the new IP Address to log in to the router.
2) If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool of the DHCP server will change accordingly at the same time，while the Virtual
Server and DMZ Host will not take effect until they are re-configured.
4.4.3 MAC Clone
Choose menu “Network → MAC Clone”, and then you can configure the MAC address of the
WAN on the screen below, Figure 4-11:
Figure 4-11 MAC Address Clone
Some ISPs require that you register the MAC address of your adapter. Changes are rarely
needed here.
¾ WAN MAC Address - This field displays the current MAC address of the Internet port. If
your ISP requires you to register the MAC address, please enter the correct MAC address
into this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit).
¾ Your PC's MAC Address - This field displays the MAC address of the PC that is managing
the router. If the MAC address is required, you can click the Clone MAC Address button
and this MAC address will fill in the WAN MAC Address field.