Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 37 -
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog
)
Note:
Limited by local law regulations, version for North America does not have region selection
option.
¾ Mode - Select the desired mode.
z 11b only/11g only/11n only - Select the corresponding mode if you are using 802.11b,
802.11g or 802.11n wireless clients only.
z 11bg mixed - Select this mode if you are using both 802.11b and 802.11g wireless
clients.
z 11bgn mixed - Select this mode if you are using a mix of 802.11b, 11g, and 11n
wireless clients. It is strongly recommended that you set the Mode to 802.11bgn mixed,
so that all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the router.
¾ Channel Width - Select the channel width from the drop-down list. The default setting is
Auto, which can adjust the channel width for your clients automatically.
)
Note:
If 11b only, 11g only or 11bg mixed is selected in the Mode field, the Channel Width
selecting field will turn grey and the value will become 20M, which is unable to be changed.
¾ Channel - This field determines which operating frequency will be used. The default channel
is set to Auto, so the AP will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
¾ Enable SSID Broadcast - When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the router. If you select the Enable
SSID Broadcast checkbox, the Wireless router will broadcast its name (SSID) on the air.