Filter
Top Products
90
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the connective-status of all ports:
T1500-28PCT(config)# show interface status
Display the connective-status of port 1:
T1500-28PCT(config)# show interface fastEthernet 1/0/1 status
show interface counters
Description
The show interface counters command is used to display the statistic
information of all ports or an Ethernet port.
Syntax
show interface [fastEthernet port | gigabitEthernet port] counters
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the statistic information of all Ethernet ports:
T1500-28PCT(config)# show interface counters
Display the statistic information of port 2:
T1500-28PCT(config)# show interface fastEthernet 1/0/2 counters
show interface description
Description
The show interface description command is used to display the description of
all ports or an Ethernet port.
Syntax
show interface [fastEthernet port | gigabitEthernet port] description