Filter
Top Products
3
Chapter 1 Using the CLI
1.1 Accessing the CLI
You can log on to the switch and access the CLI by logging on to the switch remotely by a Telnet or
SSH connection through an Ethernet port.
1.1.1. Logon by Telnet
To log on to the switch by a Telnet connection, please take the following steps:
1. Click Start and type in cmd in the Search programs and files window and press the Ente r
button.
Figure 1-1 Run Window
2. Type in telnet 192.168.0.1 in the prompt cmd window and press Enter.
Figure 1-2 Type in the telnet command