TP-Link T1500-28PCT Switch User Manual


 
170
Syntax
snmp-server traps power [ over-max-pwr-budget | port-pwr-change |
port-pwr-deny | port-pwr-over-30w | port-pwr-overload | port-short-circuit |
thermal-shutdown ]
no snmp-server traps power [ over-max-pwr-budget | port-pwr-change |
port-pwr-deny | port-pwr-over-30w | port-pwr-overload | port-short-circuit |
thermal-shutdown ]
Parameter
over-max-pwr-budget —— Enable over-max-pwr-budget trap. It is sent when
the system’s actual total supply power exceeds the system’s maximum budget
power.
port-pwr-change —— Enable the port-pwr-change trap. It is sent when a port’s
power supplying status changes (from ON to OFF or from OFF to ON).
port-pwr-deny —— Enable the port-pwr-deny trap. It is sent when a port’s power
supply is cut off because of the power management.
port-pwr-over-30w —— Enable the port-pwr-over-30w trap. It is sent when a
port’s actual power supply exceeds 30W.
port-pwr-overload —— Enable the port-pwr-overload trap. It is sent when a
port’s actual power supply exceeds the configured power limit.
port-short-circuit —— Enable the port-short-circuit trap. It is sent when a short
circuit occurs on a port.
thermal-shutdown —— Enable the thermal-shutdown trap. It is sent when the
switch’s PoE function is shut down due to the overheating of the PSE chip.
Command Mode
Global Configuration Mode
Example
Enable all SNMP PoE-related traps for the switch:
T1500-28PCT(config)# snmp-server traps power
snmp-server traps mac
Description
The snmp-server traps mac command is used to enable SNMP extended
MAC address-related traps which include four types: new, full,
learn-mode-change and max-learned. To disable the sending of SNMP