Filter
Top Products
183
Syntax
lldp receive
no lldp receive
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable port 1/0/1 to receive LLDPDU:
T1500-28PCT(config)# interface fastEthernet 1/0/1
T1500-28PCT(config-if)# lldp receive
lldp transmit
Description
The lldp transmit command is used to enable the designated port to transmit
LLDPDU. To disable the function, please use no lldp transmit command.
Syntax
lldp transmit
no lldp transmit
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable port 1/0/1 to transmit LLDPDU:
T1500-28PCT(config)# interface fastEthernet 1/0/1
T1500-28PCT(config-if)# lldp transmit
lldp snmp-trap
Description
The lldp snmp-trap command is used to enable the port’s SNMP notification. If
enabled, the port will notify the trap event to network management system. To
disable the ports' SNMP notification, please use no lldp snmp-trap command.