69
T1500-28PCT(config)# system-time dst recurring first Sun May 02:00 last
Sun Oct 02:00 45
hostname
Description
The hostname command is used to configure the system name. To clear the
system name information, please use no hostname command.
Syntax
hostname [ hostname ]
no hostname
Parameter
hostname —— System Name. The length of the name ranges from 1 to 32
characters. By default, it is the device name, for example “T1500-28PCT”.
Command Mode
Global Configuration Mode
Example
Configure the system name as TPLINK:
T1500-28PCT(config)# hostname TPLINK
location
Description
The location command is used to configure the system location. To clear the
system location information, please use no location command.
Syntax
location [ location ]
no location
Parameter
location —— Device Location. It consists of 32 characters at most. It is
“SHENZHEN” by default.
Command Mode
Global Configuration Mode