Filter
Top Products
33
Command Mode
Global Configuration Mode
Example
Configure the LACP system priority as 1024 globally:
T1500-28PCT(config)# lacp system-priority 1024
lacp port-priority
Description
The lacp port-priority command is used to configure the LACP port priority for
specified ports. To return to the default configurations, please use no lacp
port-priority command.
Syntax
lacp port-priority pri
no lacp port-priority
Parameter
pri —— The port priority, ranging from 0 to 65535. It is 32768 by default.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Configure the LACP port priority as 1024 for ports 1-3:
T1500-28PCT(config)# interface range fastEthernet 1/0/1-3
T1500-28PCT(config-if-range)# lacp port-priority 1024
Configure the LACP port priority as 2048 for port 4:
T1500-28PCT(config)# interface fastEthernet 1/0/4
T1500-28PCT(config-if)# lacp port-priority 2048
show etherchannel
Description
The show etherchanne l command is used to display the EtherChannel
information.