Filter
Top Products
129
Syntax
power inline profile name
no power inline profile
Parameter
name —— The name of the PoE profile to be bound to the port. If the name
being assigned contains spaces then put it inside double quotes.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet)
Example
Bind the PoE profile named “IP Camera” to port 2:
T1500-28PCT(config)# interface fastEthernet 1/0/2
T1500-28PCT(config-if)# power inline profile “IP Camera”
power inline time-range
Description
The power inline time-range command is used to bind a PoE time-range to the
corresponding port. To cancel the bind relation, please use no power inline
time-range command.
Syntax
power inline time-range name
no power inline time-range
Parameter
name —— The name of the PoE time-range to be bound to the port.
Command Mode
Interface Configuration Mode
Example
Bind the PoE time-range named “tRange2" to port 2:
T1500-28PCT(config)# interface fastEthernet 1/0/2
T1500-28PCT(config-if)# power inline time-range tRange2