Filter
Top Products
164
local | remote —— User Type, with local and remote options. Local indicates
that the user is connected to a local SNMP engine, while remote means that the
user is connected to a remote SNMP engine.
group-name —— The Group Name of the User. The User is classified to the
corresponding Group according to its Group Name, Security Model and Security
Level.
smode —— The Security Model of the User, with v1, v2c and v3 options. By
default, the option is v1. The Security Model of the User must be the same with
that of the Group which the User belongs to.
slev —— The Security Level of SNMP v3 Group. There are three options,
including noAuthNoPriv (no authorization and no encryption), authNoPriv
(authorization and no encryption) and authPriv (authorization and encryption).
By default, the option is “noAuthNoPriv”. The Security Level of the User must be
the same with that of the Group which the User belongs to.
cmode —— The Authentication Mode of the SNMP v3 User, with none, MD5
and SHA options. None indicates no authentication method is used, MD5
indicates the port authentication is performed via HMAC-MD5 algorithm and
SHA indicates the port authentication is performed via SHA (Secure Hash
Algorithm). SHA authentication mode has a higher security than MD5 mode. By
default, the Authentication Mode is “none”.
confirm-pwd —— Authentication Password, ranging from 1 to 16 characters.
The question marks and spaces are not allowed. This password in the
configuration file will be displayed in the symmetric encrypted form.
emode —— The Privacy Mode of the SNMP v3 User, with none and DES
options. None indicates no privacy method is used, and DES indicates DES
encryption method is used. By default, the Privacy Mode is “none”.
encrypt-pwd —— Privacy Password, ranging from 1 to 16 characters. The
question marks and spaces are not allowed. This password in the configuration
file will be displayed in the symmetric encrypted form.
Command Mode
Global Configuration Mode
Example
Add Local User admin to Group group2, and configure the Security Model of the
user as v3, the Security Level of the group as authPriv, the Authentication Mode
of the user as MD5, the Authentication Password as 11111, the Privacy Mode as
DES, and the Privacy Password as 22222: