Filter
Top Products
Channel Number
Select a channel for the wireless network of this device.
Broadcast SSID
If you enable "Broadcast SSID", every wireless station located within
the coverage of this wireless AP can discover this wireless AP easily.
If you are building a public wireless network, enabling this feature is
recommended. Disabling "Broadcast SSID" can provide better
security.
WMM
This will enhance the data transfer performance of multimedia
contents when they’re being transferred over wireless network.
WMM is not available in 11n mode.
Data Rate
The transmission rate of data packets of this wireless AP. The
wireless AP will use the highest possible selected transmission rate
to transmit the data packets if set to Auto.
Associated Clients
Click "Show Active Clients" button, then an "Active Wireless Client
Table" pops up. You can see the status of all active wireless stations
that are connecting to the access point.
Enable MAC clone
Mark the checkbox to clone the MAC address of the device. This
function is only available when you set this AP as Client mode. You
can also manually set the MAC address in LAN setting.
Enable Universal
Repeater Mode
Mark this checkbox to enable Universal Repeater Mode which
allows the TPL-310AP to repeat the signal of another wireless
access point. Available in AP, Client, or AP+WDS modes only.
SSID of Extended
Interface
When enabling the Universal Repeater Mode, specify an SSID for
the extended interface.
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the
configuration.
3.4.3 Multiple SSID
This is the window that pops up after clicking the button.
Select one of the AP, and then click the button “Show”, “Active Wireless Client Table – AP1” windows
pops up.