Filter
Top Products
4.1 Create a powerline network and extend you wireless network
The following procedure describes how to create a basic powerline network between the TPL-
310AP and an additional TRENDnet powerline adapter model TPL-303E (or TPL-304E, TPL-305E,
TPL-401E) and share Internet connection through a router to a computer or network appliance in
another room.
The procedure assumes the following:
You have one additional TRENDnet HomePlug® AV powerline adapter (models TPL-303E, TPL-
304E, TPL-305E, TPL-401E) and the powerline settings are set to factory defaults. If you have
an existing powerline network (2 or 3 other TRENDnet powerlines adapters already plugged
in and connected) and you are adding the TPL-310AP, please refer to section 4.5.
The TPL-310AP has already been initially configured in (AP) Access Point mode to allow
wireless computers or devices to wirelessly connect covered in Chapter 2.
Your router is already installed and configured for Internet connectivity.