Filter
Top Products
3.4.4 Active Wireless Client Table
This is the window that pops up after clicking the button. This will display
information on wireless currently connected to each SSID including the primary.
3.4.5 Advanced Settings
You can set advanced wireless LAN parameters of this AP.
Note: The settings on this page are intended for more advanced users who have sufficient knowledge
of wireless LAN technology. Please do not modify these settings unless you are well aware of the
effects on the wireless access point functionality and performance as a result of these changes.
Items
Information
Fragment Threshold
This value should remain at its default setting of 2346. If you
experience a high packet error rate, you may slightly increase your
fragmentation threshold within the value range of 256 to 2346.
Setting the fragmentation threshold too low may result in poor
performance.
RTS Threshold
Request To Send threshold. This value should remain at its default
setting of 2347. If you encounter inconsistent data flow, only minor
modifications to the value range between 0 and 2347 are
recommended.
Beacon Interval
Beacons are packets sent by an access point to synchronize a