Unitech RS700 Barcode Reader User Manual


 
6
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Chapter 2
Using the Hardware
The RS700 contains two Antenna Ports for wireless signal enhancement and RFID
reading points.
Installing Wi-Fi Antenna
There are two Wi-Fi Antenna Ports on the RS700 (Wi-Fi ANT1 and Wi-Fi ANT2).
Install a Wi-Fi Antenna through the following:
1. Locate the Wi-Fi Antenna Ports on the RS700’s top
panel.
2. Connect a Wi-Fi Antenna to a desired Wi-Fi Antenna
Port, and rotate the antenna cap clockwise to secure
the connection.
3. Bend the Wi-Fi Antenna(s) to a 90-degree angle.
DATA RFID PWR
PWR+RS232
RESET
GP I/0
BA
CKU
P
SW