Filter
Top Products
Chapter 3 Making RFID Applications
14
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
NOTE: Do not change the default port number from 11126, and ensure that the
port is not occupied by any other service.
3. The SRS Remote Control window appears. The SRSRC menu resides in the
left pane, while the reader status is in the right pane.
At the bottom right corner of the screen, the login info displays the user name
and the login time duration. Click Stop to end the connection between the
RS700 and the R1000 Reader.
NOTE: A dialog box appears informing User account expired! (when the
screen is idle for three minutes). Login (again) and continue with the set-
tings.
Configuring Antenna Port
To enable or disable antennas connected to antenna ports, click Device Status in the
left screen panel. Configure the Antenna Port settings through the following:
1. In the Antennas: field, check the antenna port number to enable the antenna.
Antenna port number (1 is checked by default). If more than one antenna is
enabled, the antennas switch in numerical order (i.e., 1 → 2 → 3 → 4 → 1).
2. In the Antenna Switch Time (ms): field, input the Antenna Switch Time for
each reading period (300ms by default).