Filter
Top Products
Chapter 3 Making RFID Applications
15
3. In the Inventory Times: field, input the Inventory Times for reading times within
the reading period (0ms by default). A setting of 0 or 8192ms is recommended,
but it depends on the local environment.
NOTE: The Antenna Switch Time and the Inventory Times cannot both be
simultaneously set at 0.
4. Click Apply to save the settings.
Antenna ports switch when the Antenna Switch Time or Inventory Times run out. If
installed properly, the Tags screen will display any data collected from the antennas.
Click Clear at the bottom of the screen to view the fresh data. See Installing RFID
Antenna (Optional) on page 7.
NOTE: The red DATA LED on the RS700’s front panel indicates data collection
status. While off is normal, flashing means received tag data from the
RFID reader.
Defining Smart Reader Behavior
In the left pane, click Event Management. In the right panel, define the event cycle
specifications, specify the report criteria and the setup filter rules.