Filter
Top Products
Chapter 2 Using the Hardware
10
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Performing a Hardware Reset
Perform a reset if the RS700 freezes (i.e., no longer responds).
Resetting the RS700 erases all installed records, entries and programs; returning the
RS700 to default status. (Not even the date and time settings remain.) All settings
return to default mode. However, data stored in the flash storage or in an SD Card Slot
will remain intact. Use the remote control to access the SD folder on the RS700. See
Using Remote Control on page 47.
NOTE: During the next Microsoft ActiveSync operation, lost data can be
restored that was previously synchronized on the computer, or data can
be restored from a storage card.
Reset the RS700 through one of the following:
1. Use a stylus to press the reset button on the RS700’s bottom panel.
2. Reconnect the power supply, and reset the Backup Battery Switch to the on
position.
CAUTION! Pressing the Reset Button erases current configuration settings and
reboots the RS700. The RS700 returns to default mode. All registry
settings and all files (including hidden files) are returned to their origi-
nal factory defaults.