Filter
Top Products
1-4 Overview
New Modem Port Features
Release 3.1 of the NETServer Command Line and NETServer
Manager software now support the following modem port
features:
• Download new firmware to the modems using NETServer
Manager (windows software) version 3.2 or later.
• You can now send AT commands directly to the modems
from the NETServer’s command line.
• Detect and flush of stopped ports
• Dialback delay
• Port status display shows current and configured status
• Ports reset if Carrier Detect is lost before a user connects to a
host
• Support for of up to eight Alternate Hosts