Filter
Top Products
Configuration Overview 3-5
Quick Command Overview
The NETServer’s configuration data is stored in several tables,
including the user table and the location table among others. To
change most parameters in these tables, use the set command:
set <user | location | port | etc.> <parameter name> <value>
For example:
set net0 address 192.77.203.5
set user John password Bumblebees
Some things, like individual locations and users, must be
created before they can be configured. The following command
is used:
add <user | location | filter | etc> <name>
Names are case sensitive!!! Note that anything that can be
added can also be deleted.
delete <user | location | filter | etc.> <name>
You can view current configuration information using the show
command. For example:
show net0
show user John
show ipxroutes
A complete listing of commands and options may be found in
the back of the Quick Start Guide. Help for any of these com-
mands is available using the help command. For example:
help set
help set user
help add
help delete
help show