Filter
Top Products
9-12 Administrative Tools
show arp
Show arp allows you to view IP address resolution information
for the given interface. To use this command, type
show arp <interface>
<Interface> can be one of the following:
net0 The LAN port
ptp<port #> A point to point connection on port
S<port#>
The NETServer will respond with a list of IP addresses, followed
by the corresponding MAC addresses. Each response is similar
to the following:
192.77.206.199 at 08:00:20:76:89:9B
show flash
If you want to know how much flash memory your configura-
tion data is using, type the following command:
show flash
The information you see might look something like this:
Size Filename
——— —————
61 “confdata”
9405 “config”
0 “passwd”
0 “hosttab”
0 “routes”
0 “ipxroute”
264 “location”
203 “script”
20 “snmp”
0 “filters”
0 “ipxfilt”
0 “sapfilt”
0 “netmasks”
Total FLASH: 262144 bytes
Used: 11393 bytes Free: 250751 bytes
No commit in progress