Filter
Top Products
Command Reference 10-15
Save Location Table Changes
To save changes you have made, use the following command:
save location
View the Location Table
To view the Location Table, type the following command:
show table location
The information you see might look something like this:
Location Destination Netmask Group Maxconn Type
————— ——————— —————— ——— ————— ———————
sasha 199.77.203.15 255.255.255.0 1 2 On Demand
net 192.77.206.3 255.255.255.0 1 5 Manual
View a Particular Location
To view information on a specific location, type the following
command:
show location <location name>
The information that appears may look something like this:
Location: sasha Type: Manual
Destination: 192.77.203.15 Netmask: 255.255.255.0
IPX Network: 0AE31E03
Protocol: PPP Options: Routing, Compression
Group: 1 Max Ports: 4
Idle Timeout: 10 minutes High Mark: 4 bytes
MTU: 1500 Async Map: 00000000
Dial Script: Send Command Wait For Reply
———————— ———————
atdt5551000 CONNECT