Filter
Top Products
14 VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
Attach the USB Y-Cable to the Power Supply and Connect the
Computer
The cable provided with the scanner is called a USB “Y-cable,” and you
will need to connect it to the scanner, computer, and power supply.
1. Using the on-screen window as your guide, plug the power supply
cable into the power jack on the USB Y-cable. Then plug the power
supply into an electrical outlet.
2. Plug the scanner connector on the Y-cable into the connection port
on the back of the scanner.
Please be sure the arrows on the scanner connector line up with the
arrows on the back of the scanner to avoid pins getting bent while
inserting the connection.
3. Plug the USB connector on the Y-cable into a USB port on your
computer. Connection to a USB 2.0 High Speed port provides
optimum performance, but you can also connect to a USB 1.1 port.
USB Y-Cable.
Power Jack.
Plugs into the power supply.
USB Connector.
Plugs into the computer.
Scanner Connector.
Plugs into the port on
the back of the scanner.
USB