Filter
Top Products
68 VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
CONFIGURING BEFORE SCANNING
Configure Before Scan simply opens a scanning interface when you start
to scan. You can then use the interface to change the Resolution, Scan
Mode, and other settings. When scanning is finished, the scanned
image will still be sent as the file type and to the same Destination
Application already selected in the OneTouch Properties window.
To configure before scanning:
1. Open the OneTouch Properties window.
2. Select the scan configuration Configure Before Scan.
3. Right-click on Configure Before Scan to get the menu, and choose
an interface to use for configuring before scanning.
TWAIN—The TWAIN Interface will open for you to make
changes prior to scanning. See “Scanning from the TWAIN
Interface” on page 88.
WIA—The Windows Image Acquisition Interface (WIA) will open
for you to make changes prior to scanning (available on Windows
XP only). See “Scanning from the WIA Interface” on page 105.
4. Click OK or Apply on the OneTouch Properties window.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface to use
for scanning.